Our team of skilled technicians fabricate unmatched metal-based and all-ceramic restorations in our Maine-based dental laboratory. We offer highly esthetic crowns and bridges to fulfill anterior cases of varying difficulty. We are dedicated to crafting high-quality restorations out of the best materials available to ensure longevity and esthetics. We also offer veneers and PMMA provisionals.
Our team fabricates full-contour zirconia restorations utilizing advanced CAD/CAM technology to have strength and esthetics. These restorations have the highest flexural strength of an all-ceramic restoration. However, they are still gentle enough to protext bruxers’ opposing dentition. It is an esthetic solution for bruxers and grinders when PFM metal occlusal/lingual or full-cast restorations are not desired or when patient lacks the preparation space for a PFM or has broken a PFM in the past. Zirconia can also be used for anterior teeth with a facial veneer of porcelain for improved esthetics.
Full-contour zirconia is so versatile, it can be used in almost any situation from singles, bridges with any combination of abutments and pontics, inlay bridges and screw-retained implants. Also an esthetic alternative to a PFM with metal occlusion due to limited space.
When esthetic expectations are high and it is important that the restorations match surrounding natural dentition or other existing restorations. If bonding is necessary to retain the restoration, bond strength is weaker and less predictable than other ceramics.
Shoulder preparation not needed. A mild chamfer or a feather-edge margin is good. 1mm buccal, lingual, and occlusal reduction is ideal, but can go to .5mm in some areas when reduction is limited. Minimum occlusal reduction of 0.5 mm; 1 mm is ideal. Adjustments and polishing: Adjust full-contour zirconia crowns and bridges using water and air spray to keep the restoration cool and to avoid microfractures with a fine grit diamond. If using air only, use the lightest touch possible when making adjustments. A football-shaped bur is the most effective for occlusal and lingual surfaces (on anterior teeth); a tapered bur is the ideal choice for buccal and lingual surfaces. Polish full-contour zirconia restorations with the porcelain polishing system of your choice.
It is recommended that full-contour zirconia be cemented using a zirconia primer like Z-Prime from Bisco or Clearfil Ceramic Primer from Kuraray. Alternatively, a resin reinforced glass ionomer such as RelyX Luting cement can also be used. When a greater bond is needed due to the lack of a retentive preparation, use a resin cement like RelyX Unicam or RelyX Ultimate. Before cementing all full-contour zirconia crowns, the interior surface of the crown needs to be cleaned with Ivoclean (Ivoclar Vivadent - Amherst, NY). This is critical in assuring maximum bond strength.
Solid zirconia requires a cast gold type preparation. If adjustments are needed, use zirconia specific diamonds and rubber wheels polishing with diamond paste.
- D2740 Crown – Porcelain/Ceramic Substrate
- D6245 Pontic Porcelain/Ceramic
- D6740 Abutment Crown Porcelain/Ceramic